The Eliminator Lighting VF 400 EP Fog Machine will help you create an electrifying atmosphere for mobile entertainers, small nightclubs, lounges, bars and for home use. Compact yet powerful, this 400W mobile fog machine is designed to enhance your events by illuminating the beams from your lighting fixtures. With its high efficiency heater block, the VF 400 EP quickly burns through fog liquid, leaving behind minimal residue. In just 5 minutes, the machine is ready to immerse your venue in a captivating plume of smoke, thanks to its swift warm-up time. Plus, with a reheating time of just 30 seconds and a second fog shooting time of around 37 seconds, you can maintain an uninterrupted flow of mesmerizing fog effects throughout your performance. Equipped with a 0.25 liter internal fog fluid tank, the VF 400 EP ensures long-lasting operation. Keep track of your fluid levels effortlessly with the convenient fluid level indicator, allowing you to plan your performances with ease. To provide you with complete control, the machine comes with the ADJ Z-VG400EP-R wired (fixed) remote, ensuring seamless command over your fog effects. Rest assured, the VF 400 EP only requires high-quality, water-based fog fluid, making it safe for both your audience and the environment. Its compact dimensions of 240x200x140mm and lightweight construction of 2 kg make it highly portable and perfect for on-the-go setups. Elevate your events to new heights with the Eliminator Lighting VF 400 EP Fog Machine. Unleash the power of captivating fog effects and mesmerize your audience with a truly immersive experience.Specifications:   • 400W mobile Fog Machine • High efficiency heater block burns through fog with less residue • Warm-up time: 5 minutes • Reheating Time: 30 Seconds • Second Fog Shooting Time: Around 37 Seconds • Output: 85m2 (3,000 cubic ft.) per min • Internal fog fluid tank: 0.25 Liter (full tank of fluid last 34 min.) • Fluid level indicator • Includes Includes Z-VG400EP-R wired remote (fixed) • Only use high quality, water-based fog fluid • Dimensions (LxWxH): 240x200x140mm • Weight: 2 kg

Replaces the (discontinued) 1223100002 - VF Flurry. Fully identical, only rebranded to Eliminator Lighting.   The Eliminator Lighting VF Flurry EP is a highly efficient, 600W Snow Machine. It has a spray distance of 2-5 meters. Features include: Low/High volume selection switch, low snow fluid shut off to protect the pump, snow fluid level indicator, 1 Liter internal snow fluid tank, and an On/Off switch on the rear panel. The VF Flurry EP uses water based snow fluid.SPECIFICATIONS   Features • 600W mobile Snow Machine • Spray distance: 2-5 meters • Volume selection switch: Low or high snow output • Low snow fluid sensor to protect pump • Internal snow fluid tank: 1 Liter • Fluid level indicator • Includes wired remote VFFR • On/Off switch on rear panel • Uses water based snow fluid • Fluid consumption: min 10ml/min, max 170ml/min   Weight & Dimensions • Dimensions (LxWxH): 340x255x200mm • Weight: 3.8 kg.   Specifications subject to change without notice

Optional 60X1° Linear Effect Filter for Jolt Bar FX2 and Jolt Bar FXIP

Sehr robuste Lautsprecher-Wandhalterung von HILEC für Lautsprecher bis max. 40 Kg.

Safety cables are an essential component in stage lighting setups to ensure the safety of equipment and personnel. They are used to secure various fixtures and equipment, such as stage lights, moving lights, and other heavy items, to prevent them from falling in case of accidental or unforeseen failures. It’s always smart to play it safe!   With a length of 800mm, the Accu-Cable SC6B safety cable offers ample reach and flexibility while ensuring optimal safety precautions. It has a diameter of 6mm, striking the perfect balance between agility and sturdiness. Crafted from high-quality steel, this safety cable guarantees exceptional load-bearing capabilities. It boasts an impressive weight rating of 70 kilograms, making it suitable for securing heavy objects with confidence. The steel construction also ensures excellent resistance to corrosion and wear, making it ideal for both indoor and outdoor applications. Its rugged design provides exceptional tensile strength, allowing it to withstand demanding conditions and maintain its integrity over time. Rest assured, this safety cable is engineered to meet the highest standards of safety and reliability, ensuring peace of mind in critical situations.    Equipped with reliable, quick connect link with a screw in fastener and a fall brake, this steel safety cable can be easily integrated into various systems or setups. Additionally, its compact and lightweight design enables convenient handling and installation. When it comes to safeguarding valuable assets or protecting against potential hazards, our steel safety cable stands as a trustworthy solution. Count on its strength, durability, and versatility to provide an added layer of safety in a wide range of applications.• Length: 800mm • Cable Diameter: 6mm • Weight Rating: 70kg • Fall Brake loop • Quick connect link with screw in fastener

Crafted to meet the distinctive demands of ElectraPix Series products, this clamp adapter boasts a sturdy construction, engineered to withstand the rigors of diverse applications.   Whether you're mounting ElectraPix products or other accessories, this adapter simplifies installation, saving you time and effort. With its dependable performance and compatibility, trust the 70.1mm L-Track clamp adapter to securely hold your equipment, ensuring it stays firmly in place.   Invest in the convenience and reliability of the 70.1mm L-Track clamp adapter for use with ElectraPix Series products, enhancing your equipment rigging experience. Streamline your workflow and bolster gear safety with this versatile adapter tailored to professional users' needs.SPECIFICATION   • 70.1mm Neck Height, L-Track Clamp Adapter • Includes Narrow Truss Clamp • Compatibile Fixtures: ElectraPix Par 7, ElectraPix Bar 8 and ElectraPix Bar 16   Specifications are subject to change without notice

The H2O TWO is a stimulating lighting fixture designed to bring a dynamic water-like effect to your lighting display. With a bright 120-Watt cool white LED source and 5 Dichroic colors, this fixture creates a mesmerizing simulated water effect that can be projected onto walls, ceilings, or floors. The H2O Two can be used with or without fog and is great for mood or background lighting.   This fixture is equipped with two DMX channel modes and may be controlled via DMX, the included IR wireless remote or from the built-in programs, giving you complete control over your lighting setup. The digital DMX display with a 4-button menu makes navigation easy, while the 0-100% dimming (via DMX) manual adjustable zoom and focusing lens allow you to fine-tune the lighting to your exact specifications.   Built to last, the H2O Two features long-life LED source rating of 50,000 hours, and multi-voltage operation (AC 120-240V 50/60Hz). The fixture is fan-cooled and includes a safety loop on the rear panel, ensuring reliable and safe operation. With a power consumption of only 125W (@ 220V), the H2O TWO can run all night without the need for a duty cycle.SPECIFICATIONS   Light Source: • Bright, 120W Cool White LED • Color Temperature: 7000K • 50,000 Hour Average LED Life   Features: • Color Wheel with 5 Dichroic Colors Plus White • 27° to 37° Manually Adjustable Zoom • Manual Focus of Lens for Blurry Effects • 0.6Hz to 7.5Hz Strobe Rate • 3 Built-In Programs • Primary / Secondary Mode • Fan Cooled   Control: • Control Protocol: DMX and IR Remote • 2 DMX Modes: 4 and 9 channel modes   • Dim Modes: 6 Presets (Standard, Stage, TV, Architectural, Theatre & Stage 2) • Dim Curves: 4 Presets (Linear, Square Law, Inv. Square Law and S Curve) • 0-100% Smooth Dimming • Variable, Pulse & Random Strobe Modes • Max Strobe Rate 7.5Hz. Min Strobe Rate: 0.6Hz. • With Wired Digital Communication Network • Display: OLED display with 4-button touch menu   Connections: • Data: IP20 Indoor locking 5-pin DMX In/Out • Power: IP20 Indoor locking power In/Out  • Safety Loop   Electrical: • 100-240V 50Hz/60Hz., Auto Sensing, Power Input • Power Out to link multiple like units • Max Power Consumption: 125W @220V • Max Power Link: 16 pcs @220V • Fuse Protected: T5A/250V Glass Fuse (5*20MM)   Dimensions / Weight: • Length: 315mm • Width: 231mm • Height: 234mm • Weight: 5 kg   What’s Included: • 1x 1.83m, 3x18AWG, Indoor Power locking power cable • 1x UC-IR (IR Remote)   Approvals and Ratings: • CE • cETLus (Pending) • IP20   Specifications subject to change without notice.

The Accu Cable C6B SS safety cable, constructed entirely from high-quality 316 stainless steel, represents the ultimate solution for securing outdoor fixtures weighing 70 kg. or less. Designed to withstand the harshest environmental conditions, this specialized cable showcases the unparalleled durability and corrosion resistance inherent in stainless steel. Whether it's outdoor lighting, signage, or decorative elements, the C6B SS stainless steel safety cable provides a reliable means of preventing accidental falls or damage, thereby enhancing the overall safety and aesthetics of any outdoor fixture. Its robust stainless steel construction and exceptional weather-resistant properties make it an indispensable choice when seeking to bolster the security and longevity of any outdoor installations.• 316 Stainless Steel • Length: 800mm • Cable Diameter: 6mm • Weight Rating: 70kg • TUVN.: 64.190.23.0733.01-00 • Fall Brake loop • SS Quick connect link with screw-in fastener

Optional 1X60° Linear Effect Filter for Jolt Bar FX2 and Jolt Bar FXIP

Designed to accommodate the unique requirements of ElectraPix Series products, this adapter boasts a robust construction, capable of withstanding the demands of various applications. Designed to exacting standards, this adapter seamlessly integrates with a range of our popular clamps, ensuring compatibility with Narrow Clamp, Pro Clamp, Quick Rig Clamp, JR Quick Rig Clamp, Trigger Clamp, and JR-Clamp models.   Whether you're mounting ElectraPix products or other accessories, this adapter simplifies the installation process, saving you time and effort. With its reliable performance and compatibility, you can trust the 44.5mm L-Track clamp adapter to securely hold your equipment in place, ensuring it remains safely secured.   Invest in the convenience and reliability of the 44.5mm L-Track clamp adapter for use with ElectraPix Series products, and elevate your equipment rigging experience to new heights. Streamline your workflow and enhance the safety of your gear with this versatile adapter designed to meet the demands of professional users.SPECIFICATION   • 44.5mm Neck Height, L-Track Clamp Adapter • Compatibile Clamps: Narrow Clamp, Pro Clamp, Quick Rig Clamp, JR Quick Rig Clamp, Trigger Clamp, and JR-Clamp models • Compatibile Fixtures: ElectraPix Par 7, ElectraPix Bar 8 and ElectraPix Bar 16   Specifications are subject to change without notice

Elevate your lightshow to unprecedented heights with the latest DMX lighting software package from ADJ. myDMX 5 introduces a myriad of enhancements, boasting a vast library of over 20,000 lighting fixtures, an innovative timeline feature, a dynamic live mixer, and seamless control via iPhone, iPad, or Android devices. This cutting-edge software empowers you to effortlessly craft larger and more spectacular lightshows than ever before, revolutionizing the way you bring your creative visions to life. Step into a new era of lighting control with myDMX 5, where innovation meets simplicity, making the creation of stunning light displays easier and more accessible than ever.   myDMX 5 Main Features: - USBC-DMX interface with 1024 channels (2 universes), upgradable to 2048ch (4 universes). - Includes full version of the software with 3D Visualizer, MIDI control and myDMX 5 Remote App. - Vast library of over 20,000 lighting fixtures. - 10 buttons for triggering scenes Live or in Stand Alone. - Stand Alone storage with up to 99 scenes across 5 pages. Play scenes simultaneously. - SD card memory for an almost unlimited Stand Alone show size. - Ethernet socket to control via a local network. - Two (2) 3-pin and two (2) 5-pin DMX outputs   myDMX 5 New Software Features: - Super Scene: Combine your different scenes on the timelines of a Super Scene and easily create complex and perfectly timed scenes with perfect precision. Change one of the source scenes and your Super Scene will be automatically updated. - New FX: Create impressive effects on any type of channel, and even map them in 2D. Combine an unlimited number of effects with a Super Scene timeline. - Live Mixer: Control the dimmers of each group directly in the new Live mixer rack. Trigger the strobe, a blinder, change the colour... also from the Live mixer. - Live Playback: Control Dimmer, speed, phase shift, and size directly with the new live rotary encoders available for each scene. Play your scenes forwards, backwards, or both ways. Divide your scenes into segments which can be jumped between with a GO button or BPM. - Music Sync: Synchronize your show with the music BPM using tap-tempo, MIDI clock or Ableton Link. React to the music pulse with line-in audio. Divide scenes into a number of beats of your choice to sync in harmony with tricky tempos! - Touch: Create a custom screen layout to use on a touchscreen, or link with an iPhone, iPad or Android device over WiFi. Perfect for mobile control and for installations. - Mapping Modes: Switch the entire software to mapping mode, allowing you to link any control to your keyboard, MIDI controller, or DMX console in one click! - Limits: Set the maximum movement of your fixtures and focus the beams only in the area you want. Also adjust the minimum and maximum dimming of each fixture for your entire show.   myDMX 5 Remote App: Compatible with iOS or Android. Create an entirely customized remote controller for your tablet or smartphone. myDMX 5 Remote App is a powerful and intuitive app allowing you to easily add buttons, faders, color wheels and more.    Note: The RJ45 socket is used as an alternative to USB - this does not output Art-Net. The socket also allows the device to be controlled in Stand-Alone with the myDMX 5 Remote iPhone/iPad/Android app.Specification   Features:   • DMX Lighting Control Software / Hardware for Mac & PC • Drag & Drop Patch Grid • Drag & Drop Superscene Timeline • 3D Visualizer • 2D Position View • myDMX 5 Remote App • Live Mixer for Playback • Touch Screen Compatible • MIDI   Note: The RJ45 socket is used as an alternative to USB - this does not output Art-Net. The socket also allows the device to be controlled in Stand-Alone with the myDMX 5 Remote iPhone/iPad/Android app.

Replaces the (discontinued) 1731000027 - PRO-ETSB black scrim. Fully identical, only rebranded to Accu-Stand Black Scrim for Pro Event Table, Pro Event Table II and the latest Accu-Stand Pro Event TBL 2

These trim pieces must be used on the half meter section of the WMS panel.• These trim pieces must be used on the half meter section of the WMS panel.• Dimensions (mm): 7.5 x 498.75 x 29.3

EMPOWER YOUR LIGHTING EXPERIENCE TO A NEW DIMENSION!   Introducing the Aria Wireless Management System for Advanced Lighting Control at the Shop or in the Show. Aria X2 Bridge “bridges the gap” between the new Aria X2 serial protocol and existing wireless DMX solutions. The Aria X2 Bridge is also compatible with ADJ WiFLY, Elation eFly, Magmatic MagFly and Acclaim Aria.   Frequency Agility: Aria modules boast the capability to transmit and receive signals on  standard 802.15.4 channels, both in the 2.4GHz and 915MHz (U.S) or 2.4GHz, 868MHz or 863MHz (Europe) spectrums. This agility guarantees top-notch network performance even in crowded environments. Units can seamlessly switch between spectrums, ensuring network reliability.   Bluetooth Low Energy (BLE) Configuration:  Aria simplifies device setup with BLE, enabling you to configure settings directly from the fixture menu. BLE also offers auxiliary functions such as individual DMX channel adjustments, opening doors to creative control possibilities.    OTA Updates: Keep your Aria system up-to-date with Over-The-Air (OTA) updates for Aria firmware, fixture firmware, and fixture menus. A cloud repository stores these updates, and the service app efficiently retrieves them, with future multi-hop DMX support enabling mesh network updates.   Wireless Mesh Excellence:  Aria’s robust foundation lies in its Wireless Mesh technology, featuring a versatile multi-hop DMX protocol. It adapts to various settings and use cases, with early configurations requiring minimal user intervention for optimal performance. Future releases will simplify network configuration through internal metrics, ensuring low latency and reduced collisions (available: TBA).   Frequency Hopping: Aria modules will implement a frequency hopping scheme, enhancing network reliability and reducing user configuration requirements. This innovation optimizes spectrum utilization, providing a seamless and efficient lighting experience (available: TBA).SPECIFICATIONS   Features • Single DMX Universe • 900Mhz., 2.4 GHz WiFi and Bluetooth • Configuration via App (Coming Soon) or Front panel • Wireless to DMX or DMX to Wireless • Aria X2 to SM220 (eFly, WiFly, MagFly and Acclaim Aria) • SM220 (eFly, WiFly, MagFly and Acclaim Aria) to Aria X2   Supported Protocols • DMX • RDM (Planned for future software release) • Proprietary 802.15.4 • Aria X2 Mesh Protocol (Planned for future software release) • Bluetooth 5.2 (BLE) • Aria X2 Serial Protocol • This is our proprietary serial protocol for communicating with a variety of fixtures.   RF Characteristics • Frequency range • 2404-2480 MHz • 863-870 MHz (EU) • 902-928 MHz • Radio module: Aria X2 • Interference mitigation • CSMA • Adaptive frequency hopping (on the roadmap) • OTA updates   Connectors • Antenna: 5G JT SMA • DMX: 5-pin XLR Input and Output • DC: 2.5mm/5.5mm Barrel connector • Outdoor Locking Power Input and Output   Power • AC100-240V 50/60Hz • Power Consumption: 2W • Power Fuse: T1.25A/250V. (5 x 20mm)   Physical • IP20 Aluminum / Metal enclosure • Front panel digital screen and rotary knob • M10 and M12 Threads • Safety Eyelet • Max ambient operating temp: 45°C • Max operating humidity: 75% • Storage temperature: 25°C • Rack and wall mount accessories   Dimensions and Weight • Length: 163.95mm • Width: 215.30mm • Height: 42mm • 1.23kgs   Specifications subject to change without notice.

Replaces the (discontinued) 1411100016 - VF1600. Fully identical, only rebranded to Eliminator Lighting.   Elevate your event to new heights with the Eliminator Lighting VF1600 EP Fog Machine. Boasting 1650W of power and DMX control, this mobile fogger is a must-have for mobile entertainers, vibrant nightclubs, lounges, mid-size stages, fun centers, spook alleys, and more. Witness lighting beams come to life amidst the swirling mist, as the high-efficiency heater transforms fog liquid into a mesmerizing atmosphere.   Equipped with Eliminator’s High-efficiency heater block, the VF1600 EP ensures optimal heating levels, while the LED heating indicator signals readiness. With a rapid 8-minute warm-up, 20,000 cubic ft. per minute output, and a low fog fluid shut-off sensor, seamless operation is guaranteed. Always know when you’re ready to go with the LED heater indicator (Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low). Plus, it’s fog fluid indicator lets you know with just a glance how much fog is in the 2.3-liter tank. Only use high-quality, water-based fog fluid.   The VF1600 EP comes with two remote controls. The VFEPT6 wired remote offers Interval, Duration, Output, and Continuous Fog controls. The VFEPR2 offers convenient wireless control. On the back of the machine is a fog trigger button and 3-pin DMX In/Out that allows you to operate the fogger from a DMX controller.   The VF1600 EP is feature-rich and a great value for money. Don't miss out on this fog machine's captivating magic.SPECIFICATIONS   Features • 1650W mobile DMX Fog Machine • High-efficiency heater block burns through fog with less residue • LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low • Low fog fluid shut off sensor to protect pump • Warm-up time: 3 minutes • Reheating Time: 15 Seconds • Second Fog Shooting Time: Around 12 Seconds • Output: 20,000 cubic ft. per min • Fog fluid tank: 2.3 Liter (non-removable) • Fog output switch on rear panel • 3-pin DMX In/Out • Safety Loop • Only use high quality, water-based fog fluid   Included Accessories • Includes the VFEPT6 timer wired remote • Includes the VFEPR2 wireless remote   Dimensions & Weight • Dimensions (LxWxH): 495 x 355 x 230mm • Weight: 10 kg.   Specifications are subject to change without notice

EMPOWER YOUR LIGHTING EXPERIENCE TO A NEW DIMENSION   Introducing the Aria Wireless Management System for Advanced Lighting Control at the Shop or in the Show.   Frequency Agility: Aria modules boast the capability to transmit and receive signals on  standard 802.15.4 channels, both in the 2.4GHz and 915MHz (U.S) or 2.4GHz, 868MHz or 863MHz (Europe) spectrums. This agility guarantees top-notch network performance even in crowded environments. Units can seamlessly switch between spectrums, ensuring network reliability.   Bluetooth Low Energy (BLE) Configuration:  Aria simplifies device setup with BLE, enabling you to configure settings directly from the fixture menu. BLE also offers auxiliary functions such as individual DMX channel adjustments, opening doors to creative control possibilities.    OTA Updates: Keep your Aria system up-to-date with Over-The-Air (OTA) updates for Aria firmware, fixture firmware, and fixture menus. A cloud repository stores these updates, and the service app efficiently retrieves them, with future multi-hop DMX support enabling mesh network updates.   Wireless Mesh Excellence:  Aria’s robust foundation lies in its Wireless Mesh technology, featuring a versatile multi-hop DMX protocol. It adapts to various settings and use  cases, with early configurations requiring minimal user intervention for optimal performance. Future releases will simplify network configuration through internal metrics, ensuring low latency and reduced collisions  (available: TBA).   Frequency Hopping: Aria modules will implement a frequency hopping scheme, enhancing network reliability and reducing user configuration requirements. This innovation optimizes spectrum utilization, providing a seamless and efficient lighting experience (available: TBA).  SPECIFICATIONS:   Main Features: • Single DMX Universe • 900Mhz., 2.4 GHz WiFi and Bluetooth • Configuration via App or Front Panel • Wireless to DMX or DMX to Wireless   Supported Protocols: • DMX • RDM (Planned for future software release)    • Proprietary 802.15.4 • Aria X2 Mesh Protocol (Planned for future software release) • Bluetooth 5.2 (BLE) • Aria X2 Serial Protocol   RF Characteristics: • Frequency range:    • 2404-2480 MHz    • 863-870 MHz (EU)    • 902-928 MHz • Radio module: Aria X2 • Interference mitigation:    • CSMA    • Adaptive frequency hopping (on the roadmap)    • OTA updates   Connectors: • Antenna: 5G JT SMA • DMX: 5-pin XLR Input and Output • DC: 2.5mm/5.5mm Barrel connector • Outdoor Locking Power Input and Output   Power: • AC100-240V 50/60Hz • Power Consumption: 2W • Power Fuse: T1.25A/250V. (5 x 20mm)   Physical: • IP20 Aluminum / Metal enclosure • Front panel screen and rotary knob • M10 and M12 Threads • Safety Eyelet • Max ambient operating temp: 45°C • Max operating humidity: <75% • Storage temperature: 25°C • Rack and wall mount accessories   Dimensions and Weight: • Length: 163.95mm • Width: 215.30mm • Height: 42mm • 1.23 kg   Specifications subject to change

The AS8 ACDC active column system from Avante Audio, the perfect portable sound system for small venues, acoustic performers, and mobile entertainers. With its fully-featured and easy to set up design, this system comprises an 8-inch neodymium subwoofer enclosure and two column units, one loaded with six precision-aligned 2.75-inch neodymium drivers and the other serving as a spacer to lift the speaker column to optimal height. Thanks to Avante's innovative SAM (Secure Array Mount) system, the columns can be locked securely to the sub and to each other, without any risk of toppling over. SAM connection also eliminates the need for speaker cables by passing the audio signal from the sub up to the columns. The AS8 ACDC boasts a Class D power amplifier with a built-in limiter that delivers 1000W of power, making it perfect for small bands and solo performers. The flexible 4-input mixer with a 2-band EQ allows direct connection of line-level audio sources, microphones, and even guitars, while the BLUETOOTH 5.0®+ audio connection enables wireless streaming of music from your smartphone, tablet, or laptop. This lightweight system can be easily transported in a small car and comes with a padded bag for carrying and protecting the column units. It operates self-contained on a rechargeable Lithium-Ion battery, providing an average run time of 4 to 5 hours at full charge. Alternatively, it can be plugged in using the universal power supply (100 to 240 VAC 50/60Hz). The active vented subwoofer boasts a frequency response of 55-200Hz, with a maximum output SPL of 116dB (at max. amp output). The 8-inch neodymium subwoofer, with a 1.5” voice coil and 28 oz. magnet, is housed in a durable PP plastic cabinet with a 1.0mm steel grill. Meanwhile, the passive full-range speaker column has a frequency response of 180-20kHz, a maximum output SPL of 110dB, and is fitted with 6x 2.75-inch neodymium drivers. The cabinet is also made of durable PP plastic with a 1.0mm steel grill. The AS8 ACDC also features a 4-input mixer with line out, two mic/line inputs, two guitar/line inputs, and a 1/8” stereo Aux Input. Dual band EQ and a line output (XLR) round out the package. And with the extended position dimensions of 13.8”x16.9”x79.1” / 350x430x2010mm and compact position dimensions of 13.8”x16.9”x47.6” / 350x430x1210mm, the AS8 ACDC is versatile enough to handle any small venue gig. Overall, the AS8 ACDC active column system is the ideal solution for small venues, performers and mobile entertainers looking for a portable sound system that delivers premium sound quality and ease of use.System Includes: • (1) 8-inch neodymium Subwoofer • (1) Column with six 2-75-inch neodymium Speakers • (1) Spacer • (1) Carry bag for columns Amplifier: Inputs: Two XLR/TRS combo jacks, Stereo 1/4” inputs, Stereo 1/8” input, Bluetooth® Outputs: XLR balanced line output Power output: RMS 250W (SUB) RMS, 1000W peak Volume: Input Gain control per channel EQ: Main out 2 band EQ LEDs: Power/Clip indicator Power Input: 100-240V~50/60Hz switchable 250W    On-board Lithium-Ion Battery. (Rechargeable) Battery life indicator Amplifier: Class D amplifier with switching power design Active Vented Subwoofer: Frequency Response: 55-200Hz Max Output SPL: 116dB (at max. amp output) Impedance: 4 Ohm Driver: 8-inch neodymium subwoofer, 1.5” voice coil, 28 oz. magnet Cabinet: PP plastic Grill: 1.0mm steel Dimensions: 13.8”x16.9”x16.3” / 350x430x413mm Weight: 25.8 lbs. / 11 kg. Passive Full-Range Speaker Column: Frequency Response: 180-20kHz Max. output SPL: 110dB Impedance: 4 Ohm Driver: 6x 2.75-inch neodymium drivers Cabinet: PP plastic Grill: 1.0mm steel Dimensions: 3.8”x3.8”x34.3” / 96x96x870mm (each column) Weight: 11 lbs. / 5 kg. (each column) Rear Panel: 4 input mixer with line out Two (2) Mic/Line Input (XLR/TRS Combo) Two (2) Guitar/Line Input (1/4" Stereo) 1/8” stereo Aux Input Line Output (XLR) Dual Band EQ Battery life indicator BLUETOOTH® 5.0+ Extended Position: Dimensions: 13.8”x16.9”x79.1” / 350x430x2010mm Compact Position: Dimensions: 13.8”x16.9”x47.6” / 350x430x1210mm Approvals: cETLus (Control #3069848) FCC CE  

The ADJ Lighting DMX FX512 is a cutting-edge 19-inch rack-mount DMX controller designed for professional lighting applications such as churches, nightclubs, stages, or for event production. With a compact 3-rack space design, this tactile, hands-on controller boasts powerful features, for both moving heads and RGB LED fixtures, that elevate the lighting experience for lighting designers and operators on the go or in a fixed installation.   Equipped with DMX-512 and RDM protocols, the DMX FX512 allows precise control of up to 512 DMX channels, managing up to 32 intelligent fixtures with 18 channels each. Create captivating light shows with 32 programmable scenes and 32 chases, each up to 100 steps, running up to 5 chases simultaneously. Soft-patchable faders and control wheels provide flexibility, while 16 built-in effect generators, 9 for moving lights and 7 for RGB LED fixtures, offer dynamic lighting possibilities. Using RDM, you can remotely access and configure DMX addresses and channel modes for your fixtures, eliminating the need for physically reaching each device. This not only saves you valuable time during setup but also ensures a hassle-free and error-free address assignment process.    The control interface is intuitive, featuring a digital display, 16 channel control faders, dedicated Pan/Tilt wheels, and 16 Effects/Fixture select buttons. The built-in Mic with digitally adjustable sound sensitivity enhances the interactive experience. Connect effortlessly with 5-pin XLR DMX Output. A USB port is on the front panel designed for data backup and firmware updates.   Compact and lightweight, the DMX FX512 measures 134mm x 482mm x 68.9mm and weighs only 2.13kg. It has rubber feet and can be used freely on a front of house design desk without being rack mounted.SPECIFICATION   Features:   • 19" Rack-mount DMX Controller • DMX 512 & RDM protocol. • 512 DMX channels. • Control up to 32 intelligent fixtures, up to 18 channels each • 32 chases, each up to 100 steps, can run 5 chases simultaneously • 32 programmable scenes • Soft-patchable faders & control wheels • 16 built-in effects generator. 9 for moving light and 7 for RGB LED fixtures • USB for data backup and firmware update.   Control: • DMX512 and RDM  • RDM to set the DMX addresses and DMX channel mode of the fixtures from controller • 16 channel control faders • Dedicated Pan/Tilt wheels (User Assignable) • 16 Effects / Fixture select buttons • Sound sensitivity digitally adjustable (0%-100%), built-in Mic. • With Wired Digital Communication Network   Connections: • 5pin XLR DMX Output • Power Supply Input • USB A Port   Operational Conditions: • Use in dry location only • Min. ambient temperature: 0°C • Max ambient temperature: 45°C • Humidity: <75% • Allow 6" minimum between this controller and surrounding devices or wall   Storage Conditions: • Store in a dry location • Ambient storage temperature: 25°C   Power: • Power Supply: DC9V 12V 300mA min. (DC9V 1A PSU Included) • Power Consumption: DC9V 165mA 1.5W, DC12V 16mA 2W   Dimensions & Weight: • Length: 134mm. • Width: 482mm. • Height: 68.9 mm. • Weight: 2.13 kg   Certifications & Rating: • CE • cETLus (Pending) • IP20   Specifications are subject to change without notice.

Trim to Trim Adapter for WMS Panel Series. Needed for connecting two trim parts on straight sides.

Replaces the (discontinued) 1731000029 - Pro Event Table MB. Fully identical, only rebranded to Accu-Stand. Revolutionize Your Event Setup with the Accu-Stand Pro Event TBL2 MB Upgrade Your Event Experience: Say goodbye to traditional, bulky banquet tables and embrace the future with the Accu-Stand Pro Event TBL2 MB. This innovative, collapsible table is the perfect blend of modern design and practical functionality, tailored for the dynamic world of event management. Sleek Design, Superior Portability: Crafted for professionals, the TBL2 MB boasts a sleek, clean aesthetic that seamlessly integrates into any event setting. Its compact design ensures it can be easily transported and set up anywhere, making it an essential tool for event planners and entertainment professionals alike. Customization at Your Fingertips: Stand out at every event with the TBL2 MB's customizable surface. Whether you're showcasing your brand or tailoring the look to match the theme of your event, this table allows for effortless branding, providing a unique and personalized touch. Versatile and Reliable: Ideal for supporting control equipment, DJ gear, or any event essentials, the TBL2 MB is a versatile solution to replace unstable setups like stacked road cases or unreliable venue-provided tables. Its sturdy build ensures reliability, while its lightweight nature makes it a breeze to handle. Professionalism Reimagined: Elevate your professional image with the TBL2 MB. Its elegant design and functional excellence make it an indispensable asset for all types of events. From corporate gatherings to entertainment venues, this table is designed to improve your efficiency and enhance your professional appeal. Transform Your Event Today: Make the switch to the Accu-Stand Pro Event TBL2 MB and experience a new level of convenience and style at your events. Say hello to a world where ease meets elegance, and every event becomes an opportunity to impress.• Professional Event Table to use as a greeting table, sales table, live sound or lighting designer console or for DJs • Matt Black powdercoated finish • Compact and collapsible to half of its width • Lightweight, around 18 kg. • Functional and professional looking • Dimensions (LxWxH): 1270 x 610 x 1155mm • Tube Diameter 32mm • Optional transport bag available (PRO-ETBS, code 1731000028) • Front board to add custom graphic (one side with Accu-Stand logo, other side blank) (Size W x H : 635 x 571,5mm) • Max table load: 30 kg

Replaces the (discontinued) 1731000026 - PRO Event IBeam. Fully identical, only rebranded to Accu-Stand.   Elevate Your Lighting Game with Unmatched Versatility and Portability! Key Features: Premium Aluminum I-Beam Truss: Designed specifically for the Pro Event TBL 2 and Pro Event Table II, this high-grade aluminum I-beam truss is your ideal partner for mounting a variety of lighting fixtures. Whether it's lightweight par cans, wash fixtures, effect lights, or small moving heads, the ACCU-STAND PRO EVENT IBEAM handles them all with ease. Inclusive Hardware for Easy Mounting: Say goodbye to the hassle of finding compatible mounting equipment. Our product comes with all necessary hardware, ensuring a seamless and secure attachment to your table setup. Convenient Carry Bag Included: Transporting your lighting setup has never been easier. The included carry bag offers protection and ease of transport, making the ACCU-STAND PRO EVENT IBEAM a perfect choice for mobile DJs, wedding events, and (small) club settings. Enhanced Lighting Options: Use the Duratruss Junior Clamp (sold separately) for even more versatility in hanging your lighting fixtures. Our design ensures compatibility and flexibility for your creative lighting arrangements. Optimal Height and Load Capacity: Standing at an impressive 2.2 meters, this truss system supports a maximum load of 45 kg. Lighting fixtures should be evenly distributed to maximize stability and visual impact. Compact and Lightweight Design: With a collapsed size of 1320x290x110 mm and a weight of just 7 kg, this truss system redefines portability without compromising on strength or functionality.   Why Choose the ACCU-STAND PRO EVENT IBEAM?   Offer your clients a product that combines durability, versatility, and ease of use. The ACCU-STAND PRO EVENT IBEAM extends the ACCU-STAND PRO EVENT TBL 2's functionality and is an excellent addition to any reseller's inventory, catering to a wide range of DJs and event organizers.   Whether you're a mobile DJ, involved in wedding entertainment, small events, or club setups, this truss system is tailored to meet your dynamic lighting needs. Enhance your events with professional, reliable, and stylish lighting setups.• Aluminum I-Beam truss for the Accu-Stand Pro Event TBL and ADJ Pro Event Table II to hang lighting fixtures such as light weight par cans, wash fixtures, effect lights or small moving heads • Includes hardware for mounting to the table • Includes carry bag • Use Duratruss Junior Clamp to hang lighting (clamps sold separately) • Height: 2.2M • Maximum load: 45 kg. (lighting fixtures should be evenly distributed) • Collapsed size (LxWxH): 1320x290x110 mm • Weight: 7 kg.

Replaces the (discontinued) 1411100024 - ADJ VF1100. Fully identical, only rebranded to Eliminator Lighting. The Eliminator Lighting VF1100 EP mobile Fog Machine is an easy to use tool to elevate your events by captivating the beams of your lighting effects and to create a smokey atmosphere for Halloween and other stage productions. Designed for mobile entertainers, as well as medium-sized nightclubs, lounges, bars, and home use, this 850W mobile fog machine is your go-to solution to add a touch of magic to any venue. Equipped with a high-efficiency heater block, the VF1100 EP rapidly burns through fog liquid, leaving behind minimal residue. Advanced features such as Electronic Thermo Sensing (ETS) ensure optimum heating levels, guaranteeing a consistent and mesmerizing fog experience. The low fog fluid shut-off sensor further protects the pump, enhancing the longevity of the machine. With a warm-up time of just 6 minutes and a reheating time of 10 seconds, the VF1100 EP ensures a seamless flow of fog effects throughout your performances. Its impressive output of 9,000 cubic ft. per minute fills your space with a dense fog, allowing your lighting fixtures' beams to shine through and captivate your audience. The VF1100 EP comes with a generous 1-liter internal fog fluid tank, equipped with a fluid level indicator for easy monitoring. There are two remotes included with VF1000 EP: the VF5PR wired remote and VFWR wireless remote control provide you with complete command over your fog effects, ensuring a hassle-free operation. With its sleek dimensions of 13.75" x 9.5" x 10" (350 x 240 x 250mm) and lightweight construction of 8 lbs. (3.64 kg), the VF1100 is highly portable and perfect for on-the-go setups. Only high-quality, water-based fog fluid should be used with this machine, ensuring a safe and environmentally friendly experience. Elevate your events to new heights with the Eliminator Lighting VF1100 EP Fog Machine. Immerse your audience in a breathtaking plume of smoke and let the enchantment unfold before their eyes. The VFTR13 Timer Remote is available separately, offering you even more flexibility and control.Specifications   Features • 850W mobile pro Fog Machine • High efficiency heater block burns through fog with less residue • Electronic Thermo Sensing (ETS) for optimum heating levels • Low fog fluid shut off sensor to protect pump • Warm-up time: 6 minutes • Reheating Time: 10 Seconds • Second Fog Shooting Time: 10 Seconds • Output: 255m2 (9,000 cubic ft.) per min • Internal fog fluid tank: 1 Liter • Fluid level indicator • Includes VF5PR wired remote • Includes VFWR Wireless remote • Fog output switch on rear panel • Only use high quality, water-based fog fluid   Dimensions & Weight • Dimensions (LxWxH): 350 x 240 x 250mm • Weight: 3.64 kg   Optional Remotes (sold separately) • VFTR13: Timer Wired Remote • VFWR: Replacement Wireless Remote • VF5PR: Replacement Wired Remote  

Optional 60X1° Linear Effect Filter for ADJ Jolt Panel FX2, Jolt Panel FXIP and 40 Hex Panel IP.

The ADJ Lighting SDC24 is a basic 24-channel DMX Controller that operates via an external 12VDC power supply (included) or a 9VDC battery (not included). SDC24 has 5-pin and 3-pin DMX output sockets, DIP switches to set a starting DMX channel, a master dimmer fader, an on/off switch and Channel Page button with Indicator LEDs. This a great compact controller for product demos or manual control of LED or conventional fixtures.SPECIFICATIONS:   Features: • 8 individual channel faders and 1 master fader • 24 DMX channels • Compact, portable design • 3-Pin and 5-Pin XLR output • Battery Type: PP3 9V (not included)   Control / Connection: • DIP Switches To Set Starting DMX Channel • 3pin & 5pin DMX Outputs • On/Off Switch • Channel Page button with Indicator LED's • DC9V-12V Power Supply Input • 9V Battery slot   Size / Weight: • Length: 120mm • Width: 230mm • Height: 56.66mm • Weight: 0.84kg   Electrical: • DC9V-12V 300mA min or 9V Battery (Not Included) • Power Consumption: DC9V 40mA 0.36W, DC12V 40mA 0.48W   Approvals / Ratings: • CE Approved • RoHs Compliant • IP20   Included Accessories: • 9V 1A Power Supply   Specifications subject to change without notice.